Post missing
This post could not be recovered from the original forum.
Anyone with 08 SDR Running full Ti akro system?
35 posts · Started by Silverback · 18 Feb 2009
Post 2 by Leonidas,
#2I used to have the Leo Carbon cans running the KTM akro map and changed to the full Ti Akros with the relevant map
The difference is significant throughout the rev range
I am not sure though if it is worth the extra money as the full system is quite pricey. If i had the money to spare, i would change the wheels
The difference is significant throughout the rev range
I am not sure though if it is worth the extra money as the full system is quite pricey. If i had the money to spare, i would change the wheels
Post 3 by Silverback,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by SuperDuke-DK,
#4I have seen them. Akrapovic and TITANIUM is printed on the headers. As far as i remember the scorpion logo is also printed there.
Super cool parts.....
Super cool parts.....
Post 5 by Silverback,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by Silverback,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by Silverback,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by Silverback,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by Ducati Pete,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by Ducati Pete,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by Silverback,
#11Post missing
This post could not be recovered from the original forum.
Post 12 by Motohooligan,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by TheJoker,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by Silverback,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by TheJoker,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by Ducati Pete,
#16Post missing
This post could not be recovered from the original forum.
Post 17 by Stratkat,
#17I can't really tell whether they'r ethe same as I have, but my bike has got full Ti system. I've got the p/n here somewhere, and I can obviously take pictures. Sadly I haven't ridden my bike with stock pipes, so I can't tell if anything is better or worse. I do however think, like Ducati Porn said, that there's very little difference. To get the most out of the full Ti pipe I think you need to at least change the airbox and fuelling, but also probably some headwork, or other engine mods.
Looks good though, and they are a weight saving.
Looks good though, and they are a weight saving.
Post 18 by Silverback,
#18Post missing
This post could not be recovered from the original forum.
Post 19 by Silverback,
#19They do look like Ti from "here". The welds are more like silvery solder rather than matte stainless steel welding. Quite shiny, very pornographic!
Post 20 by Silverback,
#20Post missing
This post could not be recovered from the original forum.
Post 21 by Motohooligan,
#21Post missing
This post could not be recovered from the original forum.
Post 22 by Silverback,
#22Post missing
This post could not be recovered from the original forum.
Post 23 by Silverback,
#23Post missing
This post could not be recovered from the original forum.
Post 24 by Ducati Pete,
#24Silverback stop stressing they are the tiy set up ,I can tell buy the cupplings , Inox ,( posh stainles to you lot) akras have diffrent cupplings and look more like the standed pipeing .
Post 25 by Silverback,
#25Post missing
This post could not be recovered from the original forum.
Post 26 by Stratkat,
#26Post missing
This post could not be recovered from the original forum.
Post 27 by Stratkat,
#27Post missing
This post could not be recovered from the original forum.
Post 28 by Silverback,
#28Post missing
This post could not be recovered from the original forum.
Post 29 by flatout1966,
#29freestyler i have the stainless race headers and they are identical looking to the Ti system, same shiny welds in the same place and same bends, its a very nice looking system. they come apart the same way and are coupled with springs just like the Ti system. and for the record i must concur with the magnet test. i held a strong magnet up to the race headers and it didnt stick so i tried it on the stock headers and muffler and it didnt stick to them either so there you have it first hand hand for all you sceptics out there.
Post 30 by Silverback,
#30...i forgot to add this. i know that if you paid for Ti you want Ti, i get that. but i have to tell you all the stainless race headers are sweet and under rated IMO, they are lighter than the stock headers, look great with impeccable craftsmanship and best of all much cheaper than the Ti. they have held up well so far. if you did get "stuck" with a set thinking they were Titanium there are worse things in life....
Post 31 by Stratkat,
#31Post missing
This post could not be recovered from the original forum.
Post 32 by Silverback,
#32Post missing
This post could not be recovered from the original forum.
Post 33 by Stratkat,
#33Post missing
This post could not be recovered from the original forum.
Post 34 by Silverback,
#34Post missing
This post could not be recovered from the original forum.
Post 35 by Stratkat,
#35Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to General banter