whats the nicest looking out there and where can i get a pair?
best bar end mirrors
114 posts · Started by derbyduke · 05 Jul 2010
Post 2 by motoronin,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by MADDOG53,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by mets70,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by boney95,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by derbyduke,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by loony888,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by Dutch,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by Razy,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by snapper,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by Dutch,
#11is convex better?
Post 12 by loony888,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by scamb66,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by Stratkat,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by Dutch,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by MADDOG53,
#16Post missing
This post could not be recovered from the original forum.
Post 17 by KAKRICAS,
#17Post missing
This post could not be recovered from the original forum.
Post 18 by scamb66,
#18Post missing
This post could not be recovered from the original forum.
Post 19 by scamb66,
#19Post missing
This post could not be recovered from the original forum.
Post 20 by loony888,
#20Just fitted mine. I'm guessing internal diamter of the bar is around 15mm, so I fitted mine using the expanding brass bolt, but without using the 17mm and 19mm adapators.
Quality and fit is superb. Although it is a small mirror, and flat, so you don't see much unless you move around. Mine is there just for occassional convenience though.
If i wanted more practical I'd get the adjustable ones (i.e. they're adjustable on the move) with 70mm convex.[quote][/quote]
Could you post a pic?...as i did not find any photo installed in a superduke
cheers mate
Quality and fit is superb. Although it is a small mirror, and flat, so you don't see much unless you move around. Mine is there just for occassional convenience though.
If i wanted more practical I'd get the adjustable ones (i.e. they're adjustable on the move) with 70mm convex.[quote][/quote]
Could you post a pic?...as i did not find any photo installed in a superduke
cheers mate
Post 21 by cdlabate,
#21Post missing
This post could not be recovered from the original forum.
Post 22 by scamb66,
#22Ok just went to order a set of oberon street fighters 35 pound!!!!!!! for bloody postage, so decided against it as they obviously weigh a ton.........thieving pricks.
Post 23 by loony888,
#23Post missing
This post could not be recovered from the original forum.
Post 24 by Dutch,
#24Post missing
This post could not be recovered from the original forum.
Post 25 by fuel,
#25Post missing
This post could not be recovered from the original forum.
Post 26 by scamb66,
#26Post missing
This post could not be recovered from the original forum.
Post 27 by Dutch,
#27Post missing
This post could not be recovered from the original forum.
Post 28 by fuel,
#28Post missing
This post could not be recovered from the original forum.
Post 29 by motoronin,
#29Post missing
This post could not be recovered from the original forum.
Post 30 by mets70,
#30Post missing
This post could not be recovered from the original forum.
Post 31 by mets70,
#31Post missing
This post could not be recovered from the original forum.
Post 32 by Dutch,
#32Post missing
This post could not be recovered from the original forum.
Post 33 by mets70,
#33Post missing
This post could not be recovered from the original forum.
Post 34 by fuel,
#34Post missing
This post could not be recovered from the original forum.
Post 35 by aracheon,
#35Post missing
This post could not be recovered from the original forum.
Post 36 by mets70,
#36Post missing
This post could not be recovered from the original forum.
Post 37 by Goody454,
#37Post missing
This post could not be recovered from the original forum.
Post 38 by scamb66,
#38Post missing
This post could not be recovered from the original forum.
Post 39 by scamb66,
#39Post missing
This post could not be recovered from the original forum.
Post 40 by Grendel,
#40Post missing
This post could not be recovered from the original forum.
Post 41 by scamb66,
#41Post missing
This post could not be recovered from the original forum.
Post 42 by Dutch,
#42Post missing
This post could not be recovered from the original forum.
Post 43 by Bamm-Bamm,
#43Post missing
This post could not be recovered from the original forum.
Post 44 by scamb66,
#44Post missing
This post could not be recovered from the original forum.
Post 45 by cdlabate,
#45Here is the new CRG Arrow mirror. I had the stock bar end milled down to fit the mirror as the CRG adaptor is a bit chintzy:
Post 46 by cdlabate,
#46Post missing
This post could not be recovered from the original forum.
Post 47 by scamb66,
#47Post missing
This post could not be recovered from the original forum.
Post 48 by robinpeck,
#48Post missing
This post could not be recovered from the original forum.
Post 49 by DribbleDuke,
#49Post missing
This post could not be recovered from the original forum.
Post 50 by Colonel_Klinck,
#50guys what is the diameter of the bar ends for the Super Duke?
Post 51 by robinpeck,
#51Post missing
This post could not be recovered from the original forum.
Post 52 by scamb66,
#52Post missing
This post could not be recovered from the original forum.
Post 53 by Colonel_Klinck,
#53Post missing
This post could not be recovered from the original forum.
Post 54 by robinpeck,
#54Post missing
This post could not be recovered from the original forum.
Post 55 by DribbleDuke,
#55Post missing
This post could not be recovered from the original forum.
Post 56 by superduke08,
#56So we need to do a side by side comparison with both. Pictures of two bike from the front and side and rear. THen take a pOll.
Cause really I did not think about bar end mirrors until this post and now I kinda am think they look cool.
Cause really I did not think about bar end mirrors until this post and now I kinda am think they look cool.
Post 57 by FlyingScotsman,
#57Post missing
This post could not be recovered from the original forum.
Post 58 by superduke08,
#58Post missing
This post could not be recovered from the original forum.
Post 59 by cdlabate,
#59Post missing
This post could not be recovered from the original forum.
Post 60 by MADDOG53,
#60Post missing
This post could not be recovered from the original forum.
Post 61 by turnip,
#61Post missing
This post could not be recovered from the original forum.
Post 62 by MADDOG53,
#62Hey guys
These look great. Only realised how cool the SD can look when I started doing track days and taking the mirrors off made it look 20 times cooler! Thinking of getting the Oberon 75mm covex for right side barend.
Does anyone use some sort of plug in the OEM mirror mounting point to stop water etc. gathering etc.?
Also, I'm working on the assumption that the 15mm fitting is the one to get.
Cheers
These look great. Only realised how cool the SD can look when I started doing track days and taking the mirrors off made it look 20 times cooler! Thinking of getting the Oberon 75mm covex for right side barend.
Does anyone use some sort of plug in the OEM mirror mounting point to stop water etc. gathering etc.?
Also, I'm working on the assumption that the 15mm fitting is the one to get.
Cheers
Post 63 by MADDOG53,
#63Post missing
This post could not be recovered from the original forum.
Post 64 by MADDOG53,
#64[quote="turnip"]
Does anyone use some sort of plug in the OEM mirror mounting point to stop water etc. gathering etc.?
[/quote]
http://www.ktmcyclehutt.com/ktm-parts/k ... msuperduke
Look on this page for clamps that eliminate the mirror mounting holes.
Does anyone use some sort of plug in the OEM mirror mounting point to stop water etc. gathering etc.?
[/quote]
http://www.ktmcyclehutt.com/ktm-parts/k ... msuperduke
Look on this page for clamps that eliminate the mirror mounting holes.
Post 65 by MADDOG53,
#65Post missing
This post could not be recovered from the original forum.
Post 66 by darko,
#66Post missing
This post could not be recovered from the original forum.
Post 67 by Bert,
#67Could also get some ASV bling
http://precizzionkrome.com/shop/index.p ... il&p=14394[/quote]
I like it, like the ebay mirrors too for the price.
What about the clamp for the clutch side? I know they have it, but don't see it.
http://precizzionkrome.com/shop/index.p ... il&p=14394[/quote]
I like it, like the ebay mirrors too for the price.
What about the clamp for the clutch side? I know they have it, but don't see it.
Post 68 by darko,
#68Post missing
This post could not be recovered from the original forum.
Post 69 by MADDOG53,
#69Post missing
This post could not be recovered from the original forum.
Post 70 by superduke08,
#70Post missing
This post could not be recovered from the original forum.
Post 71 by MADDOG53,
#71Post missing
This post could not be recovered from the original forum.
Post 72 by MADDOG53,
#72Post missing
This post could not be recovered from the original forum.
Post 73 by MADDOG53,
#73Post missing
This post could not be recovered from the original forum.
Post 74 by MADDOG53,
#74Post missing
This post could not be recovered from the original forum.
Post 75 by MADDOG53,
#75Post missing
This post could not be recovered from the original forum.
Post 76 by cdlabate,
#76Sweet, think that is what I'm doing in a bit too.
Post 77 by MADDOG53,
#77Post missing
This post could not be recovered from the original forum.
Post 78 by Fendt,
#78Post missing
This post could not be recovered from the original forum.
Post 79 by MADDOG53,
#79Post missing
This post could not be recovered from the original forum.
Post 80 by cdlabate,
#80Post missing
This post could not be recovered from the original forum.
Post 81 by easze76,
#81Post missing
This post could not be recovered from the original forum.
Post 82 by nampus,
#82CRG Arrows look very nice, do they fit straight on the standard barends?
Anyone here who is using the rizoma reverse mirrors?
Anyone here who is using the rizoma reverse mirrors?
Post 83 by Fendt,
#83I got the mounting kit to fit the mirrors and took out the original bar ends. You can also machine down the original bar ends to fit the mirrors on it. See the thread below, he also had the rizomas before mounting crgs.
http://www.superduke.net/forum/viewtopi ... hlight=crg[/quote]
http://www.superduke.net/forum/viewtopi ... hlight=crg[/quote]
Post 84 by cdlabate,
#84Finally! I wasn't too sure at first, but the more I looked the more I liked.
Post 85 by Bert,
#85Post missing
This post could not be recovered from the original forum.
Post 86 by nampus,
#86Post missing
This post could not be recovered from the original forum.
Post 87 by Colonel_Klinck,
#87Post missing
This post could not be recovered from the original forum.
Post 88 by cdlabate,
#88Post missing
This post could not be recovered from the original forum.
Post 89 by Bert,
#89Post missing
This post could not be recovered from the original forum.
Post 90 by cdlabate,
#90delete
Post 91 by MADDOG53,
#91Post missing
This post could not be recovered from the original forum.
Post 92 by Bert,
#92Post missing
This post could not be recovered from the original forum.
Post 93 by prikkie,
#93Post missing
This post could not be recovered from the original forum.
Post 94 by Colonel_Klinck,
#94
CRG is very good! And you can fold them back !
Post 95 by Colonel_Klinck,
#95Post missing
This post could not be recovered from the original forum.
Post 96 by ShadeTheChangingMan,
#96Not sure, I don't have a way to measure it that accurately.
Here are the Ebay mirrors.
Here are the Ebay mirrors.
Post 97 by Bert,
#97I had a look at mine earlier and it appears to be a 14mm internal diameter. Correct me if I'm wrong anyone.
Edit: make that 12mm
Edit: make that 12mm
Post 98 by Colonel_Klinck,
#98Post missing
This post could not be recovered from the original forum.
Post 99 by ShadeTheChangingMan,
#99Post missing
This post could not be recovered from the original forum.
Post 100 by Colonel_Klinck,
#100Post missing
This post could not be recovered from the original forum.
Post 101 by ShadeTheChangingMan,
#101
Post 102 by cdlabate,
#102Post missing
This post could not be recovered from the original forum.
Post 103 by Colonel_Klinck,
#103Post missing
This post could not be recovered from the original forum.
Post 104 by Colonel_Klinck,
#104Post missing
This post could not be recovered from the original forum.
Post 105 by Twisted Jester,
#105Finally got my Oberon convex mirror today So it was goodbye old ugly mirrors and hello naked look Very happy with LSL bars and new mirror combo.
Post 106 by Dutch,
#106Post missing
This post could not be recovered from the original forum.
Post 107 by Colonel_Klinck,
#107Post missing
This post could not be recovered from the original forum.
Post 108 by Keenaz,
#108Post missing
This post could not be recovered from the original forum.
Post 109 by nampus,
#109Post missing
This post could not be recovered from the original forum.
Post 110 by cdlabate,
#110Im on a budget and want to do some mods. Cheap bar ends and levers allow more money for crash protection and intake/exhaust.
I really like the way these look on Street Triples and have seen once on an SD (from this forum maybe). What is the view like (looks like it could be a forearm special) and are the cheap ebay ones ok i.e. vibration, fitment etc?
http://www.ebay.com/itm/Motorcycle-Hand ... a3&vxp=mtr
http://www.ebay.com/itm/Quality-Billet- ... 2a1f3b2e67
I really like the way these look on Street Triples and have seen once on an SD (from this forum maybe). What is the view like (looks like it could be a forearm special) and are the cheap ebay ones ok i.e. vibration, fitment etc?
http://www.ebay.com/itm/Motorcycle-Hand ... a3&vxp=mtr
http://www.ebay.com/itm/Quality-Billet- ... 2a1f3b2e67
Post 111 by fuel,
#111I've got some cheap eBay ones, but never mounted them. I suspect they will fold in as soon as i reach any speed above standing still. The rubber mounting of mine didn't fit inside the sd bars too.
I got mine from jumbodepot or something like that (via eBay)
I now use the crg hindsight lookalikes from eBay. Cheap, but very effective.
I got mine from jumbodepot or something like that (via eBay)
I now use the crg hindsight lookalikes from eBay. Cheap, but very effective.
Post 112 by 41KS,
#112http://www.constructorsrg.com/images/mi ... oto_03.jpg
I am using the CRG Arrows in the configuration shown in the link posted above.
Their edgy shape compliments the bike. Best part is they don't vibrate at speed providing great rearward vision. They are pricey but worth it.
I am using the CRG Arrows in the configuration shown in the link posted above.
Their edgy shape compliments the bike. Best part is they don't vibrate at speed providing great rearward vision. They are pricey but worth it.
Post 113 by nampus,
#113Post missing
This post could not be recovered from the original forum.
Post 114 by jaycee,
#114Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism