My 2018 SD only has a few miles on it.
Would it be worth it to install EBC HH pads on the front?
Thanks >>>> Mike
Would it be worth it to install EBC HH pads on the front?
Thanks >>>> Mike
EBC brakepads for the 1290
7 posts · Started by INTHERED · 25 Aug 2020
Post 2 by Scotty,
#2Just my 2c worth, but I’ve found EBC HH pads to work ok in the past, but experienced greater disc wear as a result of their hardness.
I prefer SBC nowadays, RS grade (Road Sintered) as opposed to track compound I think, check with a distributor.
I prefer SBC nowadays, RS grade (Road Sintered) as opposed to track compound I think, check with a distributor.
Post 3 by No. 47,
#3x 2 - EBC HH good but have knackered front discs on both my Ducati and SDRs - try DP SPD
Post 4 by INTHERED,
#4I installed the EBC pads on my 2018 and I feel that this was one of the better mods that you can do.
Its like having power brakes with no noise, low dust and improved stopping power.
Its like having power brakes with no noise, low dust and improved stopping power.
Post 5 by Sarasota_Steve,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by INTHERED,
#61290’s come stock with Brembo HH pads.
Mine are down to 2mm so I purchased a set of EBC HH and I’ll be installing them during the winter break service/cleaning. Bike has 11k miles now.
Sent from my iPhone using Tapatalk
Mine are down to 2mm so I purchased a set of EBC HH and I’ll be installing them during the winter break service/cleaning. Bike has 11k miles now.
Sent from my iPhone using Tapatalk
Post 7 by INTHERED,
#7Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism