Just put in a Puig LED relay flashed. I just simply plugged it in. The question is, there is a ground wire, I'm assuming it is, do I need to ground that wire somewhere? I tested the flashers and they work like they should.
Ground wire/Flasher relay
3 posts · Started by boney95 · 28 Mar 2011
Post 2 by Twisted Jester,
#2Not sure about the puig one, I used a unit from halfords (same as motrax) and it only had two pins which matched up to the two on the bike, no ground wire.
If it was me and it was working and there was nothing stated that it must be connected then I probably wouldn't worry about it, just tape it up if it's exposed and leave it.
If it was me and it was working and there was nothing stated that it must be connected then I probably wouldn't worry about it, just tape it up if it's exposed and leave it.
Post 3 by boney95,
#3Thank you sir, will do.
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism