Post missing
This post could not be recovered from the original forum.
LED Resistor Question
17 posts · Started by boney95 · 07 Jul 2010
Post 2 by boney95,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by bic_bicknell,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by boney95,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by ktmguy,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by samba,
#6something along these lines will do just fine.
I bought some very similar ones, though not sure if they're identical....
I have LEDs up front and in the rear, and one resistor per side is all I need. I've got them in line with the rear indies as that's where I first had LEDs. I also used to have the integrated tail light and that made no difference (as it's not flashing is it!)
I bought some very similar ones, though not sure if they're identical....
I have LEDs up front and in the rear, and one resistor per side is all I need. I've got them in line with the rear indies as that's where I first had LEDs. I also used to have the integrated tail light and that made no difference (as it's not flashing is it!)
Post 7 by bic_bicknell,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by Ya Mother,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by samba,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by Ya Mother,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by boney95,
#11Ya Mother,
Yes this is what I'm looking for! My dealer told me that these bikes don't use flasher relays. Liars. Where is the relay located, behind the fly screen? You need to be running LED's up front and in the rear to use the LED flasher relay right?
Yes this is what I'm looking for! My dealer told me that these bikes don't use flasher relays. Liars. Where is the relay located, behind the fly screen? You need to be running LED's up front and in the rear to use the LED flasher relay right?
Post 12 by Ya Mother,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by boney95,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by boney95,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by Blaster,
#15I connected for each indicator a 10watt resistor like this 
and sealed the lot with heat shrink.
Total cost about €6.
and sealed the lot with heat shrink. Total cost about €6.
Post 16 by Blaster,
#16boney, let me know if that fixes your problem...i have the same issue...turn signals up front still in there, rear integrated and flashing fast turn signals
Post 17 by Dutch,
#17Works for me:
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism