look at my waterpump impeller · SuperDukeNet Archive

Post 1 by BASH69, 13 Mar 2010, 20:09

this is from an 08 SDR with 18k miles. I didn't take a picture of the new wheel but the blades look like they got shaved down.

Post 2 by KTemmer, 13 Mar 2010, 20:18

#2

shaft and seal was fine.

Post 3 by vonhonderwitz, 13 Mar 2010, 20:33

#3

Duznt luk gud duz it??

wat cauzed you 2 take the bike apart 2 hav a luk at it?

Post 4 by ktmguy, 13 Mar 2010, 20:33

#4

Strange damage

Post 5 by Stratkat, 13 Mar 2010, 23:22

#5

Thats what mine looked like after the water pump blew and when the shop fixed it they ended up putting a standard SD impeller instead of an SDR impeller. They got it squared away eventually.

Post 6 by emuexport, 14 Mar 2010, 02:42

#6

Post missing

This post could not be recovered from the original forum.

Post 7 by Stratkat, 14 Mar 2010, 03:06

#7

Post missing

This post could not be recovered from the original forum.

Post 8 by Stratkat, 14 Mar 2010, 03:39

#8

Post missing

This post could not be recovered from the original forum.

Post 9 by Tachometer, 15 Mar 2010, 12:09

#9

thread hijack: whats the difference between the SDR pump impeller and the Std SD anyway?

Post 10 by Stratkat, 15 Mar 2010, 13:22

#10

i have 2 impellers, one i ordered as a stock replacement #61235055000 (it looks like yours that was ground away).

sometime later i ordered the complete upgrade kit and there was a newer impeller #60035055100 included with vanes that look more like a water wheel with no pitch, whereas the stock one has vanes with varying pitch like a propeller. the newer one also appears thicker in dimension and they include a different waterpump housing as well probably relived on the back to match the thicker impellor.

not sure which one the SDR uses i have a standard SD.

Post 11 by Tachometer, 15 Mar 2010, 15:15

#11

Post missing

This post could not be recovered from the original forum.