A little birdie told me that there might be something in the works.
MotoHooligan airbox for the 1290
37 posts · Started by aracheon · 29 Sep 2015
Post 2 by lc4,
#2looks tasty !!!!
Post 3 by Motohooligan,
#3If he can keep the price close to the 990 kit they would be more than comparative with the Rottweiler kit which I think are overpriced for what is essentially plastic and foam.
Post 4 by Markey,
#4Awesome. Had one of these on my 990R.
Post 5 by scamb66,
#5I am totally impressed with his workmanship and quality
of his products.
I will pay more for a high quality product anytime !!!!!
of his products.
I will pay more for a high quality product anytime !!!!!
Post 6 by Markey,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by scamb66,
#7PRICE?
Post 8 by Motohooligan,
#8will you need to add a pc with the new air filter?
i already have the full akra system w map
installed .
i already have the full akra system w map
installed .
Post 9 by Markey,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by scamb66,
#10Ran one on my 990 and loved it. Great quality.
Been waiting for MH to do one for the 1290 and have held off on a Rotty in anticipation.
Will happily fork out for another of Aarons products.
Now hurry the fook up.
Been waiting for MH to do one for the 1290 and have held off on a Rotty in anticipation.
Will happily fork out for another of Aarons products.
Now hurry the fook up.
Post 11 by Motohooligan,
#11Yeah, crack on fella...... we are all waiting
Post 12 by Motohooligan,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by Motohooligan,
#13I have decided to go with a staggered length V-stack set up for a broader toque curve and the option for a equal length shorter pair for increased over-rev power.
I ran into some clearance issues that hopefully are now sorted. Working on buttoning up the final design this week and getting the first production units ready in the next couple weeks.
Things been such a cluster lately its hard to make any headway.....
I ran into some clearance issues that hopefully are now sorted. Working on buttoning up the final design this week and getting the first production units ready in the next couple weeks.
Things been such a cluster lately its hard to make any headway.....
Post 14 by Motohooligan,
#14Well put me down on the list for one if possible please
Post 15 by Motohooligan,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by Lowrance,
#16Dyno for sure. Have a PC-V waiting.........
Post 17 by cheeheese,
#17We are starting in on the first pre-production run of 20 units up for pre-order now.... expected delivery is 12/18/15
All will include the air box, K&N filter, one billet V-stack, SAS plates and billet cold air support with the option for a second billet V-stack.
I will try and have a set of pictures up in a few days
All will include the air box, K&N filter, one billet V-stack, SAS plates and billet cold air support with the option for a second billet V-stack.
I will try and have a set of pictures up in a few days
Post 18 by Leonidas,
#18Will there be an option to purchase this without the stacks and SAS blockoff plates? I already have Rotty 80/80 stacks and blockoff plates.
Thanks and looking forware to seeing some pics.
Thanks and looking forware to seeing some pics.
Post 19 by cheeheese,
#19Post missing
This post could not be recovered from the original forum.
Post 20 by Motohooligan,
#20Filter will need oil. It is made by K&N
Shipping to the UK will be about $50
We have a unit on and have a PC-V installed for a day at the dyno scheduled for some time next week
I will post charts before and after, with and without custom map.
We are trying our best to keep the price down but it will depend on demand.
Shipping to the UK will be about $50
We have a unit on and have a PC-V installed for a day at the dyno scheduled for some time next week
I will post charts before and after, with and without custom map.
We are trying our best to keep the price down but it will depend on demand.
Post 21 by cheeheese,
#21Excellent. Thank you.
Post 22 by ma1290rky,
#22Do you have a UK agent?
Post 23 by Motohooligan,
#23Post missing
This post could not be recovered from the original forum.
Post 24 by Motohooligan,
#24Post missing
This post could not be recovered from the original forum.
Post 25 by scamb66,
#25Pre orders have shipped!! I will be posting a quick install post tomorrow as I haven't had time to make a pamphlet.
Will also be posting the first dyno runs back to back stock to Motobox before the map. Gains are double digit Weather holidays ect have delayed getting the final map done
Will also be posting the first dyno runs back to back stock to Motobox before the map. Gains are double digit Weather holidays ect have delayed getting the final map done
Post 26 by Motohooligan,
#26Other than the reduction in weight from removing the SAS is there anything else that can be gained from its removal?
I quite like the popping on roll off.
I quite like the popping on roll off.
Post 27 by Motohooligan,
#27Post missing
This post could not be recovered from the original forum.
Post 28 by Motohooligan,
#28I have been waiting patiently for final dyno results but the tuner is still dragging his feet on getting it done. I know everyone is chomping at the bit to see the numbers..... so am I for that matter. What I do have is the chart below. This is the back to back stock to motobox pulls we did when we dropped the bike off. We are hoping for another few ponies with a proper map.
Post 29 by ma1290rky,
#29Post 30 by aracheon,
#30Looking good, so that is a comparison with it just bolted on and no tune?
Post 31 by Motohooligan,
#31Looks impressive so the I'm joining the queue for the real deal map.
One question: what map was the bike running when the air box was installed? Is it the KTM Akra map by any chance?
One question: what map was the bike running when the air box was installed? Is it the KTM Akra map by any chance?
Post 32 by aracheon,
#32Nice piece of design and build.
Where would we be without cnc. In the not too distant future we will be pumping this stuff out on 3D printers, once they sort the current sh1t material selection out or you are prepared to pay big dollars for sintering machines.
Good job though and it looks bling so that will keep people happy.
Well done to you.
Where would we be without cnc. In the not too distant future we will be pumping this stuff out on 3D printers, once they sort the current sh1t material selection out or you are prepared to pay big dollars for sintering machines.
Good job though and it looks bling so that will keep people happy.
Well done to you.
Post 33 by Lowrance,
#33Post missing
This post could not be recovered from the original forum.
Post 34 by Motohooligan,
#34Post missing
This post could not be recovered from the original forum.
Post 35 by aracheon,
#35Post missing
This post could not be recovered from the original forum.
Post 36 by Motohooligan,
#36Post missing
This post could not be recovered from the original forum.
Post 37 by SUPERDUKEINOZ,
#37I have more at anodize now for orange that should be ready to ship in about a week. I will add the orange option back on the web store. I apologize for not returning some PM messages. I don't seem to be getting notifications. Please email me at [email protected], if you don't get a response in 24hr please check your spam box.
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism