[Poll] Motohooligan SD/SDR990 adjuster plates and pegs.

Pick an option and lets see if we can get MotoHooligan to make some parts for our now classic SD/SDR990's.

Edit: Especially now that Cycle Control and A&L's websites are down, so I assume they're out of business.

"I have aftermarket rearsets already" is missing

As I stated in the other thread, I'm not really needing the pegs, but they're always handy to have spares.

As for the adjusters, hell yes I'd have a set.

already have plates. could use pegs though

Thanks SDnerd.... you hit the nail on the head.

I would be happy to produce them if they sell. The only reason I never made them in the past is that Cycle Control had done them first and I didn't want to step on anyone's toes. Now that they are no longer I would gladly offer them if the market is still wanting them. I will offer pegs also, my design is somewhat unique and I could do both ridged and folding.


I no longer have my SDR so would need someone local to offer up a bike for R&D or I would even consider reverse engineering a set of CC's if they where available.

Depending on how long you'd need them for, I could offer up my adjuster plates.

I got my son to make me some plates to hang early type Gilles rearsets on. PM me if you want the measurements, or info.

I have the CC adjuster plates on mine,,,,1 up and back ! perfect position I feel with the LSL flat bars I also installed,,,,,,,,as for pegs,,,,,the best deal I found for nice grippy pegs were the DHM pegs being sold by M+P before their fire,,,,TBH I stole em with free shipping to the states,,,at like $13 USD a set !,,,,,then I found the best deal,,,,from M+P as well,,,,,Top-Block pegs,,,,same as the DHM"s,,,exactly,,,in RED,( more orange than red),,,for even cheaper ! I should have bought more,,,,I didn't,,, but they are still availabe from Top-Block in a choice of colors,,,,$70 USD a set,,,,but the kicker is shipping through DHL is another $70,,,,,but if you want some bad enough this would not matter at all,,,,,whats good about these are they are not "side specific" they can rotate for angle on either side of the bike , as such two pairs with give you two spares just in case,,,,,,the people at Top-Block are very good to deal with ,,,,,

I'd be in for a set of adjuster plates and pegs, if I could find them. So if we can get anyone to make them, count me in for cash.

Once I get caught up I will get with BassAgent and borrow his CC setup and start producing them again.

I have these still from A&L in the bag after they were anodised locally. I'd gladly send them over as samples Aaron. I dont need em just yet as my track-daying is on hold.

If the price is right then sure I'll buy a set

Aaron, email sent last week with pics of the brackets, the installation instructions and all the fittings. Did you get that?

Got it Dave, Just been swamped..... Does anyone know if these are the old CC design? From the looks of things A&L was selling CC parts???? And it appears that both of them are no longer in business?

I just don't want to start making them if they still are, that's bad juju.

Due to popular demand I will start producing these shortly

Good lad!

I'll have a set thanks

Love the looks of Moto-hooligans stuff!

Don't have any yet, waiting on the weather to go get my SD from San Diego. Will be placing a substantial order from him in May or June and would love to throw those in with it. Parts for them 990's are getting hard to find, even from KTM. All the exhausts, rear-sets and seat options appear to have dried up from manufactures. Hope he starts making lots of different pieces, so I can personalize my "Beautiful Thunder Pumpkin"!!!!

What a Sweet ride!!

Abiding in Montana

Curious??

Can front pegs be put on passenger peg brackets?? I haven't tried and would like to know if anyone has!

Abiding in Montana

Trying to get a set barrowed for R&D... anyone????

I also just replied to his PM. I'm willing to lend them, unless you wanted too Aphex (since theyre off your bike already)

I want a set of rearset plate adjusters and if M.H. is gonna make them I will order with all the other stuff I want from him. What I also want is a good pair of rear sets, like the Attacks that are no-longer being produced. Called them and they said call back in July......if they decide to make them again. Hey, M.H.!! Ever thought of making rearsets??

Abiding in Montana!

Aphex.... send me a PM or email. Yours are already off the bike so I will take yours.

I need new pedals forst, but I'll buy plates to go with them!

Voted for pegs and adjuster plates.

I really need those plates for some trackdays.

Thanks in advance.

"SLOW"michael

I got Aphex's plates and am just trying to get a free moment to do the RE and knock these out. I am stupid busy at the moment with getting a new machine set up and tooled. I haven't forgot about anyone......

Oh yeah.... I don't know if the 1290 pegs fit the OE 990 mounts..... First dibs in the lower 48 gets a set to try. If they don't fit you have to send me a peg for a couple days to sort the mount. either way you will get a set of free pegs even if I need to make different mounts.

Who's game?

DIBS! pm sent

Damn... your quick...... On the way!

I will send folding and ridged.

Looking forward to the pegs... Aphex buy me some.

Awesome. Still looking forward to a set of plates and pegs.

Cheers for the update Aaron.

Proto types done! Off to Aphex for fitting today Once I have confirmation all fits correct I will do a production run and get them off to anodize.

Woot!

Woohoo *sits refreshing the shop page*

Motohooligan's pegs are infinitely better than the stock rubber shit sticks.

Rubber shit stick? I'm not sure if I want to go to your house now.

Nah its Jim lahey from the trailer park boys. Pretty good Canadian show.

another one here in the UK if anyone wants to do a bulk buy.

I'm after pegs and plates

Store updated and ready to take orders

Presumably only the rigid option fits the 990 Hard/Power Parts rear sets?

Er, well into bottle of red now, so apologies ,but does that mean the rigid option fits the PP rear sets or not?

Mine are ordered

Just put my order for the plates in, along with a free other bits and bobs.

Being at work on a Sunday makes me spend lots of money! Lol

Here a pic of the plates and pegs for you guys.

Just a quick shot with a DSLR I'll have some more soon with them on the bike.

Both are really nice (about as nice as a cnc'd plate can be) and the footpegs are very grippy.

Are these being sent out? I ordered mine a month ago and haven't got them yet

Are these adjuster plates still available? I'd like a set if they are, but I don't see them listed in your store.

Wish I knew that when I ordered my bits. Lol. Guess I have to buy more stuff now so I don't miss out!