Is Adam making / selling a carbon fiber SDR tail section yet
SDR Solo Carbon Tail Section-Adam
11 posts · Started by MADDOG53 · 28 Sep 2012
Post 2 by Linga,
#2If he doesn't ,,you can get it here ,,,,Bic did,,,
http://hfcarbon.de/index.php?main_page=index&cPath=8
http://hfcarbon.de/index.php?main_page=index&cPath=8
Post 3 by omky756,
#3Thanks MD. On the site you listed I saw a one piece section for 309 euro = $397USD. I think there is a tank section too, plus a seat and hardware. Adds up quick.
Will have to look at this site somemore or Yo ! Adam ! What's shakin'
Will have to look at this site somemore or Yo ! Adam ! What's shakin'
Post 4 by Linga,
#4Adam is very nearly finished making the tail.
He has mine and thought it was done but wasn't happy with the final result so is making a few adjustments.
I'd wait a little if you can.
He has mine and thought it was done but wasn't happy with the final result so is making a few adjustments.
I'd wait a little if you can.
Post 5 by MADDOG53,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by preey,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by bic_bicknell,
#7Thanks again, that's what I wanted to hear.
Do you think Adam can tweek the tail section so it will fit on the SD model also?
Sure would be trick to make it so it swaps out fast for solo and two up outings !
Do you think Adam can tweek the tail section so it will fit on the SD model also?
Sure would be trick to make it so it swaps out fast for solo and two up outings !
Post 8 by MADDOG53,
#8Post 9 by preey,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by Colonel_Klinck,
#10There are currenty no carbon race belly pans available for the SD. Wish there was! Lots of carbon replacements for the standard part. Keep us posted if one becomes available, I'll put my name down for one if the quality is right.
It's not easy to produce carbon parts to a high standard at a price that people will pay. There's so much hand construction and finishing required, it becomes very time consuming, I'd make my own if I had the time but I know I wouldn't be offering to make parts for other people. Carbon parts are just expensive and the cheap mass-produced stuff is nasty and often doesn't fit without a lot of work. Most of my carbon has been collected from e-bay over the years by just patiently waiting for second hand bits to appear. The SDR tail was the exception -I just had to bite the bullet on the three hundred Euros.
It's not easy to produce carbon parts to a high standard at a price that people will pay. There's so much hand construction and finishing required, it becomes very time consuming, I'd make my own if I had the time but I know I wouldn't be offering to make parts for other people. Carbon parts are just expensive and the cheap mass-produced stuff is nasty and often doesn't fit without a lot of work. Most of my carbon has been collected from e-bay over the years by just patiently waiting for second hand bits to appear. The SDR tail was the exception -I just had to bite the bullet on the three hundred Euros.
Post 11 by preey,
#11MDI has two belly pans listed on Toni's site,,,I think that the one for $350 "is" a race belly pan,,,would have to contact them as there is no photo available as of yet of that particular pan,,,
End of archived topic · Posting is closedBack to top ↑
← Back to Hooliganism