Read-only archiveOriginal forum posts · 2005–2020

PCIII Maps

63 posts · Started by Plipton · 06 Aug 2008

Archived topic · Replies closedJump to last post ↓

Post 1 by Plipton,

#1
I hope over the coming weeks/months to put together a decent library of custom maps which people can download to their PCIII to help make their bike run better but without the expense of custom mapping and dyno time.

The maps will not be a perfect fit for all bikes but should help.

Here goes....

Edited to say....

These maps were written specifically for the bikes they were copied from and may not be suitable for your bike. Make sure the base map and bike setup are the same as yours before use. If there isn't a suitable map please don't risk it. There are no guarantees and all maps are downloaded and used at the users' risk.

Post 2 by Plipton,

#2


Map 1.
Simple map (same trim for both cylinders), Akra slipons (no baffles). No other mods. Base map believed to be KM610AK0503D03.
05 Australian SD

Map 2.
Simple map (same trim for both cylinders), Akra slipons (baffles in). No other mods. Base map believed to be KM610AK0503D03.
05 Australian SD

Map 3. Right click and save link as (to desktop etc)
Simple map (same trim for both cylinders), Leo Vince slipons baffles in. Snorkel removed. No other mods. Standard KTM base map.
05 European SD

Map 4.
Simple map (same trim for both cylinders), Standard exhaust. Snorkel removed. No other mods. Standard KTM base map.
05 European SD

The links don't seem to work. Why? I dunno, so I have removed them. Please email me if you want any of these maps.

Post 3 by Plipton,

#3


Map 1.
Split map (one for each cylinder), Akra slipons (no baffles), Base map - Akra map for 07 SD.
Taken from a Euro 07 SD

Map 2.
Single map (one trim for both cylinders), Akra slipons (no baffles), Base map - standard KTM map for 07 SDR (not Akra map). Bike also runs in PCIII.
Taken from a Euro 07 SDR

The links don't seem to work. Why? I dunno, so I have removed them. Please email me if you want any of these maps.

Post 4 by Plipton,

#4


Map 1.
Split map (one for each cylinder), Akra slipons (no baffles), Akra headers (standard), DNA filter, intake snorkel removed. Base map KM611EUO8O2031DLZ.
Euro 08 SDR


Map 2.
Split map (one for each cylinder), Akra slipons (baffles in), Akra headers (standard), standard air filter, no other mods. Base map KM611EUO8O2031DLZ.
Euro 08 SDR

Map 3.
Split map (one for each cylinder), Akra slipons (baffles out), Akra headers (standard), standard air filter, no other mods. Base map KM611EUO8O2031DLZ.
Euro 08 SDR

The links don't seem to work. Why? I dunno, so I have removed them. Please email me if you want any of these maps.

Post 5 by Plipton,

#5
09 (eventually)

Post 6 by the-bunker,

#6
Re 08 SDR map - Why did ya take your snorkel out ? - I thought it was proven to make no diff - or does it on the 08 SDR ?

Cheers,

Paul

Post 7 by Plipton,

#7
Post missing

This post could not be recovered from the original forum.

Post 8 by Holy Rider,

#8
The links is not working

Post 9 by Plipton,

#9
Post missing

This post could not be recovered from the original forum.

Post 10 by Colonel_Klinck,

#10
Post missing

This post could not be recovered from the original forum.

Post 11 by Colonel_Klinck,

#11
Ok here is my custom map for my 06 SD Akra race slip-ons (baffles out) and Motobox fitted.

Post 12 by Plipton,

#12
Post missing

This post could not be recovered from the original forum.

Post 13 by the-bunker,

#13
Post missing

This post could not be recovered from the original forum.

Post 15 by Colonel_Klinck,

#15
hey im getting ready to put my motobox and pc3 on my 07 sd with leo slipons and im needing a good map for my pc3 for it all and was hopeing someone would maybe want to share there custom map by the way im at sea level if that makes any diff thanks
patrick

Post 16 by Twisted Jester,

#16
Post missing

This post could not be recovered from the original forum.

Post 17 by Colonel_Klinck,

#17
Post missing

This post could not be recovered from the original forum.

Post 18 by Twisted Jester,

#18
Post missing

This post could not be recovered from the original forum.

Post 19 by Twisted Jester,

#19
Post missing

This post could not be recovered from the original forum.

Post 20 by Colonel_Klinck,

#20
Post missing

This post could not be recovered from the original forum.

Post 21 by Twisted Jester,

#21
Post missing

This post could not be recovered from the original forum.

Post 22 by Plipton,

#22
Post missing

This post could not be recovered from the original forum.

Post 23 by Twisted Jester,

#23
Post missing

This post could not be recovered from the original forum.

Post 24 by Plipton,

#24
Post missing

This post could not be recovered from the original forum.

Post 25 by AvataR,

#25
Post missing

This post could not be recovered from the original forum.

Post 26 by Plipton,

#26
Post missing

This post could not be recovered from the original forum.

Post 27 by Plipton,

#27
Post missing

This post could not be recovered from the original forum.

Post 28 by AvataR,

#28
Post missing

This post could not be recovered from the original forum.

Post 29 by Plipton,

#29
Post missing

This post could not be recovered from the original forum.

Post 30 by AvataR,

#30
Post missing

This post could not be recovered from the original forum.

Post 31 by Plipton,

#31
Post missing

This post could not be recovered from the original forum.

Post 32 by magus,

#32
Post missing

This post could not be recovered from the original forum.

Post 33 by bic_bicknell,

#33
Post missing

This post could not be recovered from the original forum.

Post 34 by Plipton,

#34
Here's a link to my recent custom dyno map. This for an '07 with motobox, sas removed and Graves exhaust with baffles installed (sea level). Don't know that there are a lot of Graves in use out there but thought it would be good to contribute to the library nonetheless.

Post 35 by magus,

#35
Post missing

This post could not be recovered from the original forum.

Post 36 by Twisted Jester,

#36
Post missing

This post could not be recovered from the original forum.

Post 37 by Superdan,

#37
Post missing

This post could not be recovered from the original forum.

Post 38 by Twisted Jester,

#38
Post missing

This post could not be recovered from the original forum.

Post 39 by bic_bicknell,

#39
I aint got akra map downloaded to my bike as dealer told me not to bother but put this map on anyway, when I get chance im heading for a dyno run and a tweak if needed.

Once and for all can show that 06's have more power that 07+ (SDR's omitted) I want 120+bhp

Post 40 by Twisted Jester,

#40
Post missing

This post could not be recovered from the original forum.

Post 41 by Colonel_Klinck,

#41
Post missing

This post could not be recovered from the original forum.

Post 42 by johnnyjs1,

#42
Post missing

This post could not be recovered from the original forum.

Post 43 by Superdan,

#43
Once u have the map I will happily host it on my .mac site with mine Bic. Just email it over.

Post 44 by Twisted Jester,

#44
Post missing

This post could not be recovered from the original forum.

Post 45 by johnnyjs1,

#45
Post missing

This post could not be recovered from the original forum.

Post 46 by Plipton,

#46
Post missing

This post could not be recovered from the original forum.

Post 47 by Superdan,

#47
Post missing

This post could not be recovered from the original forum.

Post 48 by Crazyhorse,

#48
Hey guys! I'm looking for a map to run on a 07 sd running the akra map, evo slip ons no baffles, motobox with k&n filter, sas block offs, pc3 and 02 block offs. A lot of the maps I see available say euro bike, is there a difference between the euro bikes and north american bikes. If so is it big enough that I should avoid those maps, also will elevation effect the mapping or does the ecu compensate.

Post 49 by Colonel_Klinck,

#49
Post missing

This post could not be recovered from the original forum.

Post 50 by Twisted Jester,

#50
Post missing

This post could not be recovered from the original forum.

Post 51 by Plipton,

#51
Post missing

This post could not be recovered from the original forum.

Post 52 by Crazyhorse,

#52
Post missing

This post could not be recovered from the original forum.

Post 53 by johnnyjs1,

#53
I went to the powercommander site, and they had these files listed:

-M925-001 *Advanced Map*, Stock Exhaust, Stock air filter, Fuel table 1 is frt cyl

-M925-000 *Advanced Map*Zero map

Are either of these the stock map.....no mods? Can I load either one untill I get a set of pipes?

Post 54 by ktmguy,

#54
Post missing

This post could not be recovered from the original forum.

Post 55 by Twisted Jester,

#55
Post missing

This post could not be recovered from the original forum.

Post 56 by johnnyjs1,

#56
Post missing

This post could not be recovered from the original forum.

Post 57 by Plipton,

#57
Post missing

This post could not be recovered from the original forum.

Post 58 by smoky,

#58
Post missing

This post could not be recovered from the original forum.

Post 59 by emuexport,

#59
Post missing

This post could not be recovered from the original forum.

Post 60 by MrZ32,

#60
Post missing

This post could not be recovered from the original forum.

Post 61 by emuexport,

#61
Post missing

This post could not be recovered from the original forum.

Post 62 by emuexport,

#62
Post missing

This post could not be recovered from the original forum.

Post 63 by emuexport,

#63
Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to How to do it!