A quck question for those that use racetecs, what pressures do you use for track???
racetecs
7 posts · Started by skip · 12 Apr 2011
Post 2 by bic_bicknell,
#234psi for the road, 32psi for the track.
Post 3 by BASH69,
#3Hot pressures (ie, check and SET STRAIGHT AFTER coming off track)
front - 36psi
rear - 34psi
Knock 5 psi off these figures to set a cold pressure, this will get you in the ball park depending on the actual weather temperature for the day
front - 36psi
rear - 34psi
Knock 5 psi off these figures to set a cold pressure, this will get you in the ball park depending on the actual weather temperature for the day
Post 4 by skip,
#4thanks lads
Post 5 by Twisted Jester,
#5Yeah I run 30 front 29 rear, set from cold.
Post 6 by Jody,
#628.5 rear 30 front set cold
AT rockingham I was advised to run at 24 front and rear cold, bike felt the same (maybe I'm ignorant !)
AT rockingham I was advised to run at 24 front and rear cold, bike felt the same (maybe I'm ignorant !)
Post 7 by fatbob,
#7same as twisted jester
slightly lower for the interacts (stiffer wall allegedly)
slightly lower for the interacts (stiffer wall allegedly)
End of archived topic · Posting is closedBack to top ↑
← Back to On track