Post missing
This post could not be recovered from the original forum.
2007 Power commander mapping
3 posts · Started by sirwrexalot · 01 Aug 2008
Post 2 by Plipton,
#2Greetings sirwrexalot ,
If you can find a good dyno shop with PCIII AND SD experience within striking range get it dyno tuned. They all (SDs) vary a little and your setup sounds like it's running less-than-perfect fueling if it feels like it has a bit of a flat spot.
The SDR has some head mods (titanium valves and some other gizmos) plus a 10500 rev limit. Torque is much the same - it just makes it for longer
Your bike will have a 16T sprocket as standard if it's an 07, BTW.
Cheers
Rick
If you can find a good dyno shop with PCIII AND SD experience within striking range get it dyno tuned. They all (SDs) vary a little and your setup sounds like it's running less-than-perfect fueling if it feels like it has a bit of a flat spot.
The SDR has some head mods (titanium valves and some other gizmos) plus a 10500 rev limit. Torque is much the same - it just makes it for longer
Your bike will have a 16T sprocket as standard if it's an 07, BTW.
Cheers
Rick
Post 3 by Zenbiker,
#3Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom