Post missing
This post could not be recovered from the original forum.
Akras - Removing the Baffles
9 posts · Started by D4NPH · 04 Apr 2007
Post 2 by D4NPH,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by Dr F,
#3 Is it a button head screw that takes and allen key like the fasteners on the SD
The drawing in the destructions shows a rivet. And i had a quick look and it looks like a rivet
The drawing in the destructions shows a rivet. And i had a quick look and it looks like a rivet
Post 4 by baggieman,
#4Mines a bolt too. If you have a rivet, you will have to drill it out (usualy they are hard as f**k) then if you want to replace them use a self tapping screw, a better job would be to have a nut welded to the baffle so it can be refitted using a stainless allen bolt.
Post 5 by Plipton,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by baggieman,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by arashi,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by D4NPH,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by someone,
#9Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom