Read-only archiveOriginal forum posts · 2005–2020

Chain Riveting Tool

6 posts · Started by cjc · 27 Mar 2010

Archived topic · Replies closedJump to last post ↓

Post 1 by cjc,

#1
Anyone used a chain cutting and riveting tool they like?

The inexpensive ones I've seen appear to be made of cheese. I'm thinking about getting the less expensive one shown here:
http://www.didchain.com/Riveting_tool_22609.htm

Any recommendations?

Post 2 by doctypo,

#2


I've had nothing but good luck with this thing on many of my chains. I typically use an angle grinder to cut the head off of a rivet before I push it through with the tool just to make sure I don't break anything.

Post 3 by doctypo,

#3
Large Bolt cutters work pretty well as a chain breaker too

Post 4 by BigBlackDuke,

#4
Post missing

This post could not be recovered from the original forum.

Post 5 by cjc,

#5
Post missing

This post could not be recovered from the original forum.

Post 6 by ShadeTheChangingMan,

#6
Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom