Post missing
This post could not be recovered from the original forum.
Cleaning akrapovic mufflers?
5 posts · Started by Plipton · 24 Oct 2009
Post 2 by cdv478,
#2Hi Chree,
It depends what's got on to them. If it's chain lube I use a petrol-soaked rag to get it off. If they are dull I would use a light metal polish. Try something like Silvo or Brasso (T-Cut can work well too) but try them out on an area you can't see before going mad.
I have used Solvol in the past on ally silencers but found it too abrasive. Maybe OK for titanium or stainless pipes though.
Headers - much the same story. Use the weakest polish or solvent you can get away with. If you have one use a mechanical polisher to get the best shine.
If it's shine you want.........
It depends what's got on to them. If it's chain lube I use a petrol-soaked rag to get it off. If they are dull I would use a light metal polish. Try something like Silvo or Brasso (T-Cut can work well too) but try them out on an area you can't see before going mad.
I have used Solvol in the past on ally silencers but found it too abrasive. Maybe OK for titanium or stainless pipes though.
Headers - much the same story. Use the weakest polish or solvent you can get away with. If you have one use a mechanical polisher to get the best shine.
If it's shine you want.........
Post 3 by ktmsuperdukeeddie,
#3Akrapovic per their website, recommend using WD40 to clean the mufflers.
I follow these recommendations and have been happy with the results. It removes chain lube, road tar etc. and leaves a uniform finish that doesn't seem to attract dust.
I just spray some on a cloth rag which makes it easier to keep it away from the stickers. Not sure if it would damage them, just didn't want to take the chance.
I follow these recommendations and have been happy with the results. It removes chain lube, road tar etc. and leaves a uniform finish that doesn't seem to attract dust.
I just spray some on a cloth rag which makes it easier to keep it away from the stickers. Not sure if it would damage them, just didn't want to take the chance.
Post 4 by ShadeTheChangingMan,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by thewall67,
#5Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom