Clutch Banjo size

I'm looking at replacing all the lines with some newies. HEL said they could do a clutch line for me but need to know banjo size and length of line. If anyone has done this before or could help so I don't have to pull it apart before I get all the bits? I hate doing things twice. I had a search in th forum but, no luck.
Thanks for any help

Grendel just did the brake side and it was a M10 1.0 pitch. Sorry...

Yeah that's what I got on the Brakek side but the guy at HEL said to cheack the clutch as he was not sure if KTM ran an M8 banjo... Oh well I might just have to take it off after all.

if you can wait till tomorrow i can get what info you need,
thread and pitch of clutch banjo ?
length of clutch hose ?


paul.

That'd be awesome mate.
Thread and pitch of banjo each end. (maybe hole size)
I.D. of collar and length of overall.
If you can do that mate that would so helpfull.
thanks

righto,
the thread on the clutch master and slave is 10x1.00mm std brake stuff so the banjo fittings, crush washers and bolts are all pretty std for european bikes.
the clutch line is 1090mm long, end to end, with a straight banjo at the m/cyl end and a 90 deg bend at the s/cyl end. that should sort you out.
I bought a full set of custom goodridge lines for mine from john stamnas here in QLD, don't use them unless you absolutely have to, they're USELESS!

paul.

Cheers mate.
I'll fire off the order to HEL on Monday. I'm just waitin for the new Oberon slave to rock up in the mail and then I'm into it. I've noticed a little leaking around the slave and I couldn't engage on another ride so I'm praying it holds out