Post missing
This post could not be recovered from the original forum.
clutch slave cylinder
39 posts · Started by Bobaworld · 26 Sep 2008
Post 2 by Bobaworld,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by Bobaworld,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by Bobaworld,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by aP,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by ptpete,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by Superdan,
#7The clutch slave cylinder on my 07 seems to be going. I noticed that it seemed to be slowly losing pressure and hisses when I pull the lever. I was under the impression that this was on the 05-06 models only. Has anyone had the slave cylinder go on an 07-up model? Also, what aftermarket brands are holding up the best? I've searched but thought I would get some fresh info from you guys.
Post 8 by BASH69,
#8http://www.superduke.net/forum/viewtopi ... ght=clutch
Go for one of these you can find em on ebay in germany I think?
Go for one of these you can find em on ebay in germany I think?
Post 9 by Twisted Jester,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by cjc,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by DukeofCornwall,
#11Post missing
This post could not be recovered from the original forum.
Post 12 by ktmguy,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by edefauler,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by ktmguy,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by SDSmurf,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by Jaybiker,
#16Post missing
This post could not be recovered from the original forum.
Post 17 by lc4,
#17Just had my Clutch slave cylinder leaking oil, pulled it apart and fitted a new O ring to find it still leaking.
Found that the piston has a hairline crack in behind the ball bearing, found it by pumping the clutch with the slave assembly off the motor.
New Oberon set up ordered.
Found that the piston has a hairline crack in behind the ball bearing, found it by pumping the clutch with the slave assembly off the motor.
New Oberon set up ordered.
Post 18 by jmann,
#18It's a design flaw. There's not enough metal at the critical point.
Post 19 by MADDOG53,
#19Oberon with base plate time,,,,,
Post 20 by lc4,
#20Post missing
This post could not be recovered from the original forum.
Post 21 by ktmguy,
#21Just put a Rekluse slave on my bike yesterday. Adjustable, works great, and less expensive than everything else out there.
Post 22 by lc4,
#22Post missing
This post could not be recovered from the original forum.
Post 23 by AndersH,
#23Post missing
This post could not be recovered from the original forum.
Post 24 by tripoddave,
#24Post missing
This post could not be recovered from the original forum.
Post 25 by Lowrance,
#25Magura mineral looks great but standard brake and clutch fluid works just fine.
Post 26 by MADDOG53,
#26Post missing
This post could not be recovered from the original forum.
Post 27 by lc4,
#27Post missing
This post could not be recovered from the original forum.
Post 28 by lc4,
#28Fitted Oberon slave cylinder.
Overall clutch action and feel better than original.
Quality is excellent
Bling with a purpose
Old piston has a crack around the nipple
Overall clutch action and feel better than original.
Quality is excellent
Bling with a purpose
Old piston has a crack around the nipple
Post 29 by AndersH,
#29Post missing
This post could not be recovered from the original forum.
Post 30 by AndersH,
#30Do not use brake fluid!
Use Magura Blood or just get some LHM oil. I used some generic LHM oil made for Citröen cars.
Use Magura Blood or just get some LHM oil. I used some generic LHM oil made for Citröen cars.
Post 31 by MADDOG53,
#31Post missing
This post could not be recovered from the original forum.
Post 32 by Top_cat2,
#32Post missing
This post could not be recovered from the original forum.
Post 33 by MrZ32,
#33where is the cheapest place to get this Oberon from ?
does it come with the Bleed bolt & nipple ? & what about the Copper crush washers ?
Plz, plz ? any one ?
thanks daz
does it come with the Bleed bolt & nipple ? & what about the Copper crush washers ?
Plz, plz ? any one ?
thanks daz
Post 34 by MADDOG53,
#34Ebay is where I got my oberon unit from. .. Any 990 lc8 motored and probably any lc8 based item will work
Post 35 by Willh,
#35Not hard to find,,,,,,,,,,,,,,get the base plate also ,,,,get rid of the stock plastic,,,,,,,
http://www.ebay.com/sch/i.html?_odkw=KT ... E&_sacat=0
http://www.ebay.com/sch/i.html?_odkw=KT ... E&_sacat=0
Post 36 by Jaybiker,
#36Post 37 by Top_cat2,
#37Just installed the oberon one. it was fast and ez to install. Also got mine from cjdesigns. fast shipping.
Post 38 by lc4,
#38Post missing
This post could not be recovered from the original forum.
Post 39 by Jaybiker,
#39Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom