Read-only archiveOriginal forum posts · 2005–2020

Duke Back From The DYNO!

7 posts · Started by SDSmurf · 20 Jan 2008

Archived topic · Replies closedJump to last post ↓

Post 1 by SDSmurf,

#1
Image

Here are the results from my dyno run. My Duke has the Graves System, PC III, and a 40 tooth rear. Just broke a 100 hp. After comparing to some of the ones posted I fell a little short on the power gains. How much does humidity contribute to results or performance? As you can see it was only 19% due to the winter months here, typically we are 80-100% in the spring and summer. Any input is much appreciated.

Marc[/img]

Post 2 by Dr F,

#2
You shouldn't feel bad about your power from the dyno report. All dynos are different. They are more about being a tool for tuning your engine, rather than being used to get a number to use for bragging rights.

And just so you know, the number of teeth on your sprockets should have no effect on the dyno report.

Post 3 by lockers,

#3
Just be careful - I got dyno result on my 05 Fireblade reading only 138hp and they told me only THEY know how to work on bikes.

Of course. I then took it to another 3 dyno shops and got readings of 145, 145 and....... 145.4hp (it was obviously feeling perky that day).

Post 4 by Dr F,

#4
Post missing

This post could not be recovered from the original forum.

Post 5 by Zenbiker,

#5
Post missing

This post could not be recovered from the original forum.

Post 6 by lockers,

#6
Post missing

This post could not be recovered from the original forum.

Post 7 by Zenbiker,

#7
Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom