[/b]
End Can dilemma?
16 posts · Started by robbo01 · 16 Jan 2009
Post 2 by robbo01,
#2Thick Git i am i forgot to add the link!!! http://www.twinshack.co.uk/prods/197.html Thoughts would be appreciated.
Post 3 by SuperDuke-DK,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by robbo01,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by ShadeTheChangingMan,
#5I want those Corse Titanium ones but cant stump up the cash just now. They were a LOT cheaper when the euro was better too!
I've not seen any in the flesh, JJlester had a set and posted clips on youtube which can be found easily, but nothing compares to a real world test. Word is, teh sound awesome without baffles but very thin with baffles. Apparently they are louder than akras sans baffles too.
I love em!
FYI, JJ used to buy them direct from HP cos he lives near them...and post to members at no extra cost. I dont think he's done it for a while now though.
I've not seen any in the flesh, JJlester had a set and posted clips on youtube which can be found easily, but nothing compares to a real world test. Word is, teh sound awesome without baffles but very thin with baffles. Apparently they are louder than akras sans baffles too.
I love em!
FYI, JJ used to buy them direct from HP cos he lives near them...and post to members at no extra cost. I dont think he's done it for a while now though.
Post 6 by robbo01,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by RRR,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by robbo01,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by Joely Boy,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by RRR,
#10Here ya go, these are excellent pipes in build quality and sound. Mine are 300mm in length as opposed to the standard 350mm. When ordering from twinshack you just ask them and they'll get HP to make em shorter. I think the HP factory is in Italy and it took about a month to receive mine from the time I ordered.
This is a vid of JJLester's old bike I think and was one of the reasons I got my pipes, they sound deep and booming down low but really have a sharp bark up high.
http://au.youtube.com/watch?v=0Mb5M6X5D ... re=related
This is a vid of JJLester's old bike I think and was one of the reasons I got my pipes, they sound deep and booming down low but really have a sharp bark up high.
http://au.youtube.com/watch?v=0Mb5M6X5D ... re=related
Post 11 by kiwi,
#11Post missing
This post could not be recovered from the original forum.
Post 12 by Joely Boy,
#12theres some very nice cans made for awere bikes out there , but I think the best looking for neetness and astheticks its got to be thoughs Hexacans made by Remus ,Austrian cans for an Austrian bike , I havent got a set yet but once my worenty is up there will be a set of Qkrapovicks for sale .
Post 13 by SDSmurf,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by robbo01,
#14kiwi, the indicators are there in the standard position up front and on to the side on my home made fender eliminator at the back. They are billit black led type ones and pretty small.
And as for the ride, I'm ready when you are! If most of the SE QLD guys off here come there would have to be close to 10 bikes and I know another 3 that might go as well.
And as for the ride, I'm ready when you are! If most of the SE QLD guys off here come there would have to be close to 10 bikes and I know another 3 that might go as well.
Post 15 by cdv478,
#15Graves Carbon exhaust. bitch to fit, sounds good though. I bent one of the mounts on the y-pipe when i low-sided at Barber and it eventually cracked
Post 16 by ktmguy,
#16Looks great, but I prefer the HP's on the SD, rather than graves on SDR - That gap is a little too big on the SDR imo, something that annoys me a bit about my leo's on my SD (but not so big a gap)... Love the sound clips for both, though, awesome! A v-twin should be loud![/i]
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom