Post missing
This post could not be recovered from the original forum.
Exhaust rear header splitted up
7 posts · Started by harvester · 14 Mar 2010
Post 2 by scotsduke,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by harvester,
#3I will try, thx..
And what about the Y-pipe connection? I have a slip-on Akra, and it blows out some exhaust fumes and grime there, not much but the engine can still running if I "plug in" the Akras with my hands
And what about the Y-pipe connection? I have a slip-on Akra, and it blows out some exhaust fumes and grime there, not much but the engine can still running if I "plug in" the Akras with my hands
Post 4 by Superdan,
#4Yeah the graphite gasket needs replacing fairly often have one in my garage ready for a change:
It is meant to have the 4 slits up the sides, I cants see anything else wrong with your pics apart from the missing clamp? do you have the clamp?
It is meant to have the 4 slits up the sides, I cants see anything else wrong with your pics apart from the missing clamp? do you have the clamp?
Post 5 by Superdan,
#5Akras dont have a gasket like the above, the clamp holds it tight, you do get a bit of black residue coming suppose thats normal on the akras.
Post 6 by harvester,
#6I've never changed the graphite ring, and the bike has ~20k km now
I read that it can worn fast but I didn't ordered one yet..
I read that it can worn fast but I didn't ordered one yet..
Post 7 by Superdan,
#7The part number is on the box above its not expensive.
Think you have to undo the exhaust to get it off though
The old ring just disintergrates over time.
Think you have to undo the exhaust to get it off though
The old ring just disintergrates over time.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom