Post missing
This post could not be recovered from the original forum.
Flat bars for Superduke?
12 posts · Started by bic_bicknell · 15 Dec 2009
Post 2 by bic_bicknell,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by smoky,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by motoronin,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by trackday junkie,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by bic_bicknell,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by BASH69,
#7They are interesting bars on that Monster. They remind me of the bars we called 'ace' bars in the late '70s and '80s. Here they are on my RD250 and KH400. Yes... they were not very practical but we were all stupid 17 year olds and wanted to be Barry Sheene.
Post 8 by trackday junkie,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by trackday junkie,
#9"ace" bars, Sure that's the right spelling? On this side of the pond they were clubmans. Real men like Freddie, Eddie, and Wayne used and bent superbike bars to steer- superbikes .
Post 10 by TheJoker,
#10If you are tall the ace/clubman style bars should be good on the open road and a pain in town. Some wind protection with superbike bars would be....
IMO- Let the Hardly Abelson guys worry about looks and style- set it up so it works for you and ride the foooooooo.. out of it
Jeff
IMO- Let the Hardly Abelson guys worry about looks and style- set it up so it works for you and ride the foooooooo.. out of it
Jeff
Post 11 by bic_bicknell,
#11I machined 6mm off my risers to get the bars a bit lower.
Post 12 by TheJoker,
#12Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom