Post missing
This post could not be recovered from the original forum.
Friggin' oil leak
10 posts · Started by 2bigalow · 04 Sep 2010
Post 2 by TC's SD,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by 2bigalow,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by TC's SD,
#4if it's cracked it would come apart, they must be pulled straight out, i got hasty and put a little side load on one and it broke easily. The same result will happen if you pull too hard on the hose to remove it from the elbow.
The tech who put mine back together didnt fully seat the vc gasket, (and forgot my airbox breather hose!)
I would say to try to check tightness of the 4 bolts, but since your in that far you might as well replace the works...
The tech who put mine back together didnt fully seat the vc gasket, (and forgot my airbox breather hose!)
I would say to try to check tightness of the 4 bolts, but since your in that far you might as well replace the works...
Post 5 by 2bigalow,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by 2bigalow,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by Lowrance,
#7Nice it's sorted. I'm in a state of shock that Del Amo was able to help you. Lucky.
John
John
Post 8 by 2bigalow,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by superduke08,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by 2bigalow,
#10Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom