Post missing
This post could not be recovered from the original forum.
Gear sensor Modification - help
18 posts · Started by topendz · 06 Apr 2007
Post 2 by Plipton,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by topendz,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by Superdan,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by topendz,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by Dr F,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by topendz,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by mekanik,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by Dr F,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by topendz,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by Ankka,
#11Post missing
This post could not be recovered from the original forum.
Post 12 by MarkyMark76,
#12I took the wires off from connector on side of battery.
There is two black-white three wire connectors, just make sure you'll have the right one and take those two wires off.
There is two black-white three wire connectors, just make sure you'll have the right one and take those two wires off.
Post 13 by sprdave,
#13At almost the same time as you, I was attempting to “easilyâ€
Post 14 by topendz,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by topendz,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by topendz,
#16Post missing
This post could not be recovered from the original forum.
Post 17 by jaanusj,
#17Post missing
This post could not be recovered from the original forum.
Post 18 by Twisted Jester,
#18Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom