Post missing
This post could not be recovered from the original forum.
Help with possible coolant loss !
11 posts · Started by Allan P. · 15 Apr 2009
Post 2 by Superdan,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by cjc,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by kendo57,
#4I had a bad head gasket and was losing coolant. As part of diagnosing/trying to find the problem, dealer analyzed exhaust gasses. How does your oil filter look - any clues there?
Post 5 by Superdan,
#5Water pump seal , allows water into the oil when it fails. Not changed one myself but supposed to be fairly easy.
Post 6 by 9nine0,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by Allan P.,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by Allan P.,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by 9nine0,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by folke33,
#10Are you using the OEM paper oil filter? If so, remove the filter and make sure that the filter pleats are straight and have no "wave" to them. Water cannot pass through the paper filter and will clog the pleats. The oil pressure will collaps the pleats as it pumps oil pass the restricted filter.
Post 11 by Allan P.,
#11Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom