Hi guys seems like a simple enough question but how do I remove the pin in the stock levers to use it in the rizoma levers I have? I cant quite seem to get it out?
How to remove levers?
12 posts · Started by emuexport · 10 Mar 2011
Post 2 by whufc0,
#2What side? clutch or brake, i just changed both of mine yesterday, took me 10 mins to do both
Post 3 by MADDOG53,
#3You have to tap out the pivot bearing thing a mabob,, then the pin slides right out for re-use,,,,,,
Post 4 by emuexport,
#4The brake. I have removed them but need to remove the pin that links the brake pressure to the lever.
Post 5 by emuexport,
#5So unscrew the allen key linking the nipple to the pivot bearing? then tap out? I want to reuse it surely this will mash it?
Post 6 by whufc0,
#6If i remember correctly, there is the stock adjuster, just keep turning it, cant remember if it in or out, then with a little wiggle you can get the pin out
Post 7 by MADDOG53,
#7Post missing
This post could not be recovered from the original forum.
Post 8 by emuexport,
#8Ah I think I get what you mean. Will give it a go.
Post 9 by MADDOG53,
#9Just loosening the adjuster is not quite enough, to wiggle mine out anyway, the pivot bearing did come out fairly easy once started,,,
Post 10 by emuexport,
#10God damn!
I feel so stupid! I figured it out and pushed the pin out from the lever and it worked a treat.
Thanks for the help guys. The rizoma levers are pretty nice. Mind you so are those ASVs.
I feel so stupid! I figured it out and pushed the pin out from the lever and it worked a treat.
Thanks for the help guys. The rizoma levers are pretty nice. Mind you so are those ASVs.
Post 11 by whufc0,
#11Glad it came out in the end
Post 12 by MADDOG53,
#12Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom