KTM Alarm

Hi All
the KTM alarm that just plugs into the loom, I know its a Metasystem but what model Metasystem is it?, i need to let the insurance know.

Ironlung,

I asked Meta the same question last year it took a while but I got the answer in the end:

Good afternoon,

Thank you for your e-mail. I have looked on the Thatcham Listing, (which your insurance company should have done) and the KTM is listed with the following product reference, E587TK (Thatcham No.: TMC1-196/1104). This product is not supplied by MetaSystem UK, presumably directly from Italy.

Please ask your insurance company to check these details, which are located on page 59 of the Thatcham listings.

thanks for that,but (there's always a but with insurance companies) Bennetts have no listing for that alarm, they say don't have a thatchams listing for this alarm! any ideas what i should do next?
I do have a final resort which is the shop was supposed to fit a datatool system 4 alarm (which is what i told the insurance company) but he didn't because fitting the Metasystems mean't he just plugged it in, i could just take it back and make him fit the Datatool one, but i don't want to go there yet

Have a look at page 3 of this .pdf, which is on Thatcham's own site

http://www.thatcham.org/security/pdfs/c ... esCAT1.pdf

I would be telling Bennetts that their listings may be out of date!

All sorted thank you Superv, you are a gent

duke, it is to fit to the ktm mounting bracket kit,, Part # 611.12.035.044 (07)

this mounts under yer seat, whare the tool kit is and charcoal canister.

actual alarm for the 07 sd is part # 600.12.035.100

Page #144 of the KTM Hardequipment 2008

I'm not sure the cable for the LED is needed for the 07 model.
The new dash has an alarm LED built in, and KTM should have sorted the cable out already to be part of the plug and play contact.

No

I have the KTM alarm. Is there any way to configure it at?

On my other bike I have a Datatool alarm which fully arms the Alarm 30 seconds after ignition is turned off.

On the SD the alarm seems to only enable the immobiliser 30 seconds after the ignition is turned off. You have to manually arm the alarm for it to be fully armed (movement, tamper etc).

Yes the self arming is immobilisor only, not the alarm. The loom connection has the immobilisor circuits 'broken' that are connected in order for the bike to run by either the disarmed alarm or the plug. Having the plug there made it really easy to find all the wiring required to fit a non-KTM alarm!!