I have modified the rear fender and wanted to install led turn signals. When I hooked them up nothing happened so I got a universal led relay and they still don't work. Please help!
Led turn signals, help!
6 posts · Started by roamer · 23 Aug 2011
Post 2 by roamer,
#2Simple stuff first, did you check the fuse?
Post 3 by ktmguy,
#3Yes, fuse number 3 is good.
Post 4 by roamer,
#4How about polarity?
LEDs have a positive and a negative lead.
Try reversing one.
LEDs have a positive and a negative lead.
Try reversing one.
Post 5 by roamer,
#5Already did that
Post 6 by Bert,
#6A bit more info please? Do the front ones work or none at all?
If the front ones work and the back not and you already switched polarity it is most likely a bad negative. The negative for the back indicators is the same as the rear light and the wire could be loose or you damaged when you modified the rear guard.
If the front ones work and the back not and you already switched polarity it is most likely a bad negative. The negative for the back indicators is the same as the rear light and the wire could be loose or you damaged when you modified the rear guard.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom