Read-only archiveOriginal forum posts · 2005–2020

Longer Gear Shifter?

14 posts · Started by zamfield · 05 Aug 2012

Archived topic · Replies closedJump to last post ↓
Anyone know of a longer gear shifter?
I have a heck of a time fitting my boot under the lever... Could do with it about an inch longer!
Post missing

This post could not be recovered from the original forum.

I'm a dude, not a Sheila!... with big 'Ol wellies!!
Be easy enough to modify a lever to be longer. But you will get a lot more travel so your toe will have to lift/push far more. In the old days I used to have Kawa triples and there was quite a complex series of levers and joints - but this was before good rose joints and they used to wear. Sometimes the length of travel on these bikes to change gear was so bad you couldn't do it with a toe and ankle movement. you had to lift the whole foot off the footpeg!

Why don't you get some smaller boots?
Post missing

This post could not be recovered from the original forum.

Post missing

This post could not be recovered from the original forum.

Has anyone tried it, or is this all speculation??

I'll just ride in my bowling shoes... The ones with the really long laces!!
You need some threaded bar (cant remeber the grade) a few nuts and one of these http://www.ebay.co.uk/itm/M5-Stainless- ... 3f162f9a0b

Bit of hacksaw action and your done.

Essentially its what you get in the adjustable footrest kit.
You could always hit up a metal works shop and get one custom made. I mean I don't think it cost that much. Plus you can get it built to your spec.
Post missing

This post could not be recovered from the original forum.

Post missing

This post could not be recovered from the original forum.

Post missing

This post could not be recovered from the original forum.

Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom