I ordered new mirrors (#8,9) and new supports( #10) and the mirrors won't screw in. Have they changed something over the years? The mirrors seem 1mm bigger than the support.
Mirror Problems
11 posts · Started by algunn · 19 Jun 2013
Post 2 by DribbleDuke,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by bic_bicknell,
#3The new Kawasaki Z750 / 800 mirrors are way better design and styling for the Superduke and fit straight on.
Threads on OE brackets and mirrors have not changed - they are all standard diameters and threads.
Threads on OE brackets and mirrors have not changed - they are all standard diameters and threads.
Post 4 by jmann,
#4Assuming part no. 58412040050.
Not quite sure what you mean by 1mm too big. Do you mean the thread, the OD or depth of thread?
I don't think anything has changed over the years.
Not quite sure what you mean by 1mm too big. Do you mean the thread, the OD or depth of thread?
I don't think anything has changed over the years.
Post 5 by jmann,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by bic_bicknell,
#6Or CWF (Carbon Whore Fool)
Post 7 by rocketchick,
#7Good ole tap & die kit and chase those threads.
Post 8 by weeksy,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by rocketchick,
#9Post missing
This post could not be recovered from the original forum.
Post 10 by algunn,
#10Duh! Reverse threads! Obviously never occurred to me. Thanks again guys!
Post 11 by SDNerd,
#11From out of the west rode Jimmy the Freak with his 28 pounds of hanging meat.
There was one bad thing to this good trick .
The Lord had blessed him with a cork screw dick.
So all over the east Jim did hunt , to find the girl with a cork screw c##t.
Eventually he found her and got her to bed , what a bastard left hand thread.
There was one bad thing to this good trick .
The Lord had blessed him with a cork screw dick.
So all over the east Jim did hunt , to find the girl with a cork screw c##t.
Eventually he found her and got her to bed , what a bastard left hand thread.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom