Post missing
This post could not be recovered from the original forum.
Overheat issue resolved...
6 posts · Started by OldYelr · 12 Jul 2007
Post 2 by JiggleRacing,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by BigBlackDuke,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by OldYelr,
#4I believe the theory is that due to the faulty ground the fan is not reaching full speed. Normally it can pull enough air to prevent over-heat, as it should. Have your dealer check that...
Define "starting to overheat"... Mine would max out the temp bar then the temp bar would start flashing, under the same conditions.
Define "starting to overheat"... Mine would max out the temp bar then the temp bar would start flashing, under the same conditions.
Post 5 by BigBlackDuke,
#5Post missing
This post could not be recovered from the original forum.
Post 6 by OldYelr,
#6Clutch side. Sorry, not enoug sreeB when I wrote that...
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom