I searched but couldn't find anything. SD with a SDR spring. My sag was "professionally" done but I want to check it myself, since I just learned how to get it. I'd bet money it's off. A ballpark # would be ok, but I'm 200lbs geared, 14.3 stone, 91kg. Also, the manual doesn't give any standard sag settings. But I've read somewhere that they do? My EXC has sag parameters.
Rear Sag-SDR Spring on SD
6 posts · Started by boney95 · 13 Jun 2013
Post 2 by boney95,
#2Front sag #'s if you got those too. Or I can look them up I'm sure.
Post 3 by KTM666,
#3Here you are
Front Sag 25mm
Front Rider Sag 34mm
Rear Sag 6mm
Rear Rider Sag 35mm
Its easy to get either sag or rider sag correct ....to get both means you have correct springs for your weight
Front Sag 25mm
Front Rider Sag 34mm
Rear Sag 6mm
Rear Rider Sag 35mm
Its easy to get either sag or rider sag correct ....to get both means you have correct springs for your weight
Post 4 by boney95,
#4Thanks bro! I know my fork springs are too light, but hopefully the rear I should be able to get.
Post 5 by dirty irving,
#5Boney ,
Same weight as you,
Front springs should be fine 07 on
Tim
Same weight as you,
Front springs should be fine 07 on
Tim
Post 6 by boney95,
#6Thumbs Up
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom