Grimace
Post missing.
rigga
Post missing.
DukeofCornwall
This is a subjective topic,as those with each set of exhausts are bound to sat theirs are the ones to have,and if you have spent £800 on the Akropovic evolution system i can see the reasoning .... but any set of cans will have a greater benefit over the stock catalyst equiped set up,the open pipe design will let the motor breath a lot easier and help with the slightly snatchy throttle responce,and prob more importantly save a great deal of weight which is stored high up at the rear....... believe me you will be shocked as to how much the standard system weighs ...... my own personal choice was down to money,as i couldnt justify the Akropvic cans as personally i dont think there is that much difference with any perforated pipe designed silencer,which most if not all are..... so i got some nearly new Leo Vinci carbon cans,and if you do a little search there are some sound clips posted of various cans.and the sd with LV's sounds glorious to my ears,so im well chuffed,add the ktm open pipe map and jobs a good un
rigga
Post missing.
svvmax
Post missing.
azdunj
here's mine :
you don't have to pay the £880,(my local dealer has a set of evo's marked up at £998)i got mine from italy(through ebay) for £630.
you don't have to pay the £880,(my local dealer has a set of evo's marked up at £998)i got mine from italy(through ebay) for £630.
Bodge
Post missing.
superdukegod
Post missing.
rigga
Post missing.
DukeofCornwall
Post missing.
rigga
Bodge.... got no shots directly rear on,this is the closest one i have,will have to take some more the gap is determined by the pipework run from the link pipe and the rear exhaust hangers,so cant see how it can be closer without some work.... although painting/removing the silver heat shield miht make it not so noticable
superdukegod...... by plastic trim do you mean the silver coloured part that sits above the standard silencers?? if so that bit is bolted to the cans and comes off the bike when you remove them.... pretty sure someone on here posted a pic hen they had managed to transfer it over to their aftermarket cans
superdukegod...... by plastic trim do you mean the silver coloured part that sits above the standard silencers?? if so that bit is bolted to the cans and comes off the bike when you remove them.... pretty sure someone on here posted a pic hen they had managed to transfer it over to their aftermarket cans
Ginger Monkey
Post missing.
rigga
Post missing.
rigga
Post missing.
superdukegod
Post missing.
Gregz
Post missing.
rigga
Post missing.
Bodge
Post missing.
Cavham
And stay off the pies
cut down hangers are an option though
cut down hangers are an option though
Bodge
Post missing.
rigga
Post missing.
Cavham
Post missing.
Bodge
Post missing.
Plipton
Post missing.
madmaxmasalla
i show you:
coming soon:
what do you think?
coming soon:
what do you think?
Plipton
Shiney with a capital SH
Gregz
Post missing.
madmaxmasalla
madmaxmasalla
You are a legend! AND you must have too much time on your hands LOL
Looks magic!
You are a legend! AND you must have too much time on your hands LOL
Looks magic!
madmaxmasalla
Post missing.
jjlester_74
Post missing.
jjlester_74
hi guys
i can't see the pics
where is ?
i can't see the pics
where is ?
Gregz
madmaxmasalla
Insane Max! well done - I could not have the patience for that amount of polishing
Nickeluring
todays work, see the diference after 5 hands of polish
Bodge
Post missing.
Millar
Post missing.
Nickeluring
Post missing.
the-bunker
Post missing.
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
Plipton
Post missing.
QuikeBCN
i finish tomorrow....
madmaxmasalla
Post missing.
madmaxmasalla
baggieman
Post missing.
Nickeluring
Post missing.
madmaxmasalla
Post missing.
Gregz
Keep note Lad's that to achieve these stunning results you will need an assistant to help you with the polishing. Max uses his feline to achieve his results; and it shows:
D4NPH
GregZ i hope that's not you sat in the background behind the cat wearing Donald Duck socks and wrapped up in a Pink robe with Teddy Bears on it
madmaxmasalla
Post missing.
KTMax
Post missing.
madmaxmasalla
Post missing.
Gregz
Post missing.
madmaxmasalla
Post missing.
KTMax
Post missing.
jjlester_74
Post missing.
Plipton
Post missing.
Bald Kirk
Post missing.
jjlester_74
Post missing.
jjlester_74
Post missing.
Dr F
Post missing.
jjlester_74
Post missing.
azdunj
Post missing.
rigga
Post missing.
azdunj
Post missing.
KTMax
Post missing.
Plipton
[/color]:D
Plipton
Heah Plipton, do you have a side on view of the entire bike? I'm interested to see how the black seat looks with the orange....
Plipton
Post missing.
arashi
Post missing.
KTMax
Post missing.
arashi
I guess I should post up my Akras too! I love the way titanium turns blue and purple...
Dr F
Start working on the cornering boyzzz.... Chicken stripes where they shouldn't be on a SuperDuke...
arashi
Post missing.
KTMax
Post missing.
arashi
Post missing.
KTMax
Post missing.
arashi
Post missing.
Ankka
Post missing.
jjlester_74
Post missing.
D4NPH
Post missing.
Bodge
More pics for ya.
My Leo's
mekanik's round Akras:
And both from behind:
My Leo's
mekanik's round Akras:
And both from behind:
Plipton
hi guys this is the new HP exhaust
i can't abb the pics on this topic
bye
i can't abb the pics on this topic
bye
jjlester_74
Look at the size of the exits !! Effing Huge !!
rigga
Nice V-max on the background....
jjlester_74
Post missing.
madmaxmasalla
Post missing.
rigga
termignoni power ho yehaaaaaaaaaaaaaaaaaaa man!
finished as soon as possible
finished as soon as possible
rigga
Post missing.
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
KTMax
Post missing.
madmaxmasalla
Post missing.
flow
Post missing.
jjlester_74
Post missing.
madmaxmasalla
Post missing.
Bodge
CAN SOMEONE OF YOU TELL ME WHY I SHOULD NOT BUY THE HP ONES ?
THE ONLY NEGATIV I SEE, IS THAT IT CAN RAIN INSIDE !!!!
I WILL WORK THE END AND PUT THEM WITH CARBON, IF I RECEIVE THEM.
THE ONLY NEGATIV I SEE, IS THAT IT CAN RAIN INSIDE !!!!
I WILL WORK THE END AND PUT THEM WITH CARBON, IF I RECEIVE THEM.
KTMax
hi
the hp exhaust as great exhaust
the hp exhaust as great exhaust
Plipton
termignoni for ever mannnnnnnnnnn!
baggieman
Post missing.
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
baggieman
Post missing.
carbonduke
Post missing.
KTMax
Post missing.
madmaxmasalla
Post missing.
carbonduke
dude the bike is still fugly beyond belief, regardless what sheepies picture you post.
btw i didnt ask for your family shots
btw i didnt ask for your family shots
KTMax
deja-vu stuff!!!! I see this exact same picture everytime I go to bed!! Spuky!
It's his bike but the front... just isn't there, it seems like he changed the front for a bug's head.
It's his bike but the front... just isn't there, it seems like he changed the front for a bug's head.
madmaxmasalla
There one thing both these mutilated SDs have in common, the owners don't know how to ride them as both bike have chicken stripes like a riding school.
Must be a compensating thing I guess...
Must be a compensating thing I guess...
madmaxmasalla
Post missing.
madmaxmasalla
Post missing.
baggieman
"demanding gay-ish" perhaps?
MarkyMark76
Post missing.
madmaxmasalla
Post missing.
flow
Post missing.
madmaxmasalla
Post missing.
R Doug
Post missing.
R Doug
Post missing.
jjlester_74
Post missing.
R Doug
Post missing.
adwburn
Post missing.