Read-only archiveOriginal forum posts · 2005–2020

Sidestand (temporary) removal?

10 posts · Started by Apex_seeker · 13 May 2007

Archived topic · Replies closedJump to last post ↓

Post 1 by Apex_seeker,

#1
So, what would one need to do to remove the sidestand, as for a Track Day (putting it back on at the end of the day, so minimum fuss required)?

Of course, one needs to unbolt it and take it out, but then you need to connect some wires, probably, so the bike doesn´t think it´s still got the sidestand and it´s down, right?

Post 2 by arashi,

#2
KTM sells the module you plug in to fool the ECU into thinking the side stand is up.

SIDE STAND DISASSEMBLY KIT
Part# 61034030100
Allows you to remove the side stand for racing application.

Post 3 by Apex_seeker,

#3
Post missing

This post could not be recovered from the original forum.

Post 4 by Dr F,

#4
Can't remember what the sidestand switch looks like, but can't you just put a cable tie round it to keep it depressed?

Post 5 by 990Glen,

#5
Post missing

This post could not be recovered from the original forum.

Post 6 by Apex_seeker,

#6
Post missing

This post could not be recovered from the original forum.

Post 7 by arashi,

#7
Post missing

This post could not be recovered from the original forum.

Post 8 by 990Glen,

#8
Post missing

This post could not be recovered from the original forum.

Post 9 by Dr F,

#9
Post missing

This post could not be recovered from the original forum.

Post 10 by 990Glen,

#10
Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom