Post missing
This post could not be recovered from the original forum.
Spool size?
18 posts · Started by frankpgh · 23 Feb 2007
Post 2 by frankpgh,
#2Post missing
This post could not be recovered from the original forum.
Post 3 by 990Glen,
#3Post missing
This post could not be recovered from the original forum.
Post 4 by pervytwin,
#4Post missing
This post could not be recovered from the original forum.
Post 5 by KTMax,
#5Just fitted some bobbins today and standard M10 bolts (1.5mm pitch) fitted just right. The only problem I had, is the mounting face is recessed, so will need some washers to pad it out a cm or so.
Post 6 by Special K,
#6Post missing
This post could not be recovered from the original forum.
Post 7 by Plipton,
#7frankpgh,
I have nothing to add on the spools, but I did get your PM and I'll give you a call today.
I have nothing to add on the spools, but I did get your PM and I'll give you a call today.
Post 8 by frankpgh,
#8Post missing
This post could not be recovered from the original forum.
Post 9 by the-bunker,
#9A word of warning - if you have the R&G cotton reels fitted to the swing arm and have a new chain or one with little wear on it, the rear wheel spindle cannot be removed as the chain adjuster block catches on the cotton reel.
Post 10 by WA Duke,
#10Post missing
This post could not be recovered from the original forum.
Post 11 by Plipton,
#11Post missing
This post could not be recovered from the original forum.
Post 12 by WA Duke,
#12Post missing
This post could not be recovered from the original forum.
Post 13 by arashi,
#13Post missing
This post could not be recovered from the original forum.
Post 14 by Dr F,
#14Post missing
This post could not be recovered from the original forum.
Post 15 by topendz,
#15Post missing
This post could not be recovered from the original forum.
Post 16 by arashi,
#16Post missing
This post could not be recovered from the original forum.
Post 17 by topendz,
#17Post missing
This post could not be recovered from the original forum.
Post 18 by arashi,
#18Post missing
This post could not be recovered from the original forum.
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom