Read-only archiveOriginal forum posts · 2005–2020

US SuperDuke Owners Gearing Question

10 posts · Started by Nickeluring · 07 Oct 2007

Archived topic · Replies closedJump to last post ↓

Post 1 by Nickeluring,

#1
I thought I would order a -1 (16T) down front sprocket for my SD before my buddie and I went to Arkansas to ride corners. Of course KTM was out of them and back ordered. So I spent a afternoon calling KTM suppliers trying to find one. I finally found one and had it sent two day ground in hopes of getting it before I went on my trip. Well, It didn't come in time but was at my house when I got back. Cool...
I go out this evening to replace the stock 17Tooth front and come to find out it's a 16Tooth already. WTF? The book and all the spec's I find show the bike to have a stock 17Tooth front. Is this a US thing or what? Has anyone else ran into this same situation?

Post 2 by Nickeluring,

#2
What year is your bike? I'm pretty sure the 06 comes with 16t and 07 with 17t. If you have an 07 are you the first owner? Other than that I have no idea.

Post 3 by treeman,

#3
Post missing

This post could not be recovered from the original forum.

Post 4 by Nickeluring,

#4
Post missing

This post could not be recovered from the original forum.

Post 5 by Plipton,

#5
Post missing

This post could not be recovered from the original forum.

Post 6 by treeman,

#6
Post missing

This post could not be recovered from the original forum.

Post 7 by treeman,

#7
Post missing

This post could not be recovered from the original forum.

Post 8 by DrJ,

#8
Post missing

This post could not be recovered from the original forum.

Post 9 by baggieman,

#9
Damn right Nick, went out and pulled the cover off of the front sprocket ktm Part # right there is (600.33.129.0"16") so yep, I manually counted the teeth 16 of em too.

Post 10 by DrJ,

#10
Post missing

This post could not be recovered from the original forum.

End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom