Read-only archiveOriginal forum posts · 2005–2020

Vibration after akros fitted HELP

5 posts · Started by treeman · 08 Oct 2008

Archived topic · Replies closedJump to last post ↓

Post 1 by treeman,

#1
Been off the site for a while but need has brought me back.
Had set of Akros fitted and had to park bike with out even testing it.First ride was a straight 1400 km.I found that after about 70 km/h I had a fine tingleing vibration in the handle bars that very quickly caused my fingers to go dead. The vibration is very high pitched and fine - nothing like the vibes you get through the foot pegs.
Is there a known cause / cure. Pipes seem fitted correctly .

Post 2 by fleegal,

#2
Post missing

This post could not be recovered from the original forum.

Post 3 by treeman,

#3
Post missing

This post could not be recovered from the original forum.

Post 4 by fleegal,

#4
Post missing

This post could not be recovered from the original forum.

Post 5 by treeman,

#5
Ok Will look at it......................thanks for now
End of archived topic · Posting is closedBack to top ↑
← Back to Technical - Dr F's Words of Wisdom